.. _RiggingView: RIGGING (Tab) -------------------- .. image:: ../_images/rigging_view_mode.JPG :alt: RIGGING Tab. The RIGGING :ref:`tab` contains :ref:`Panels` not found anywhere else in System Optimiser, and is structured to give a clear overview of the rigging information from all of the sources within a system design. It can be reached directly with **Ctrl/Cmd+4**. This :ref:`tab` contains the following :ref:`Panels`: * Source List: Located on the left of the screen, this is a cut-down version of the :ref:`Source Manager`. :ref:`Templates` are displayed in this list, showing all variants of sources contained within the project. If, for example, an :ref:`SVA Controller` contains two hangs using the same :ref:`template`, then this will only be displayed in the Source List once as rigging information for both hangs is identical. * Detail View: Located in the centre of the screen, this is a cut-down version of the :ref:`3D View<3dview>` which focusses automatically on a model of the :ref:`template` selected, in free space. The camera orbits the model's Centre of Gravity, indicated by the red point marker. * Topview: Located in the top-right of the screen, the Topview displays the pickpoint information as well as the physical dimensions of the selected :ref:`template`. Pickpoints are represented by the red point markers, and their coordinates are given for the purpose of a rigging markout. Additional essential information like 'Bottom Height' or 'Bottom Angle' is shown below. The 'Stack/Hang' dropdown menu can be used to switch between each source using the same :ref:`template` in order to access their coordinate information (For example, choosing between the left and the right hang of a stereo system). * Overview: Located in the bottom-right of the screen, the Overview displays a top-down render of the :ref:`3D View<3dview>`, scaled to fit all loudspeaker sources in the project into view. Although some :ref:`Panels` in the RIGGING :ref:`tab` cannot be closed, changes made will be restored next time it is selected, including the position of :ref:`Panels`, and those that have been :ref:`'popped out' into additional windows`.