Designing Systems#
This section discusses the tools built in to System Optimiser to create complex loudspeaker system designs effortlessly.
Use the arrangement tool to place loudspeakers in a multitude of shapes and layouts. The template engine is an incredibly powerful way of managing sources from a single controller. Measurement microphones can be placed anywhere within the 3D view. Arrays are aimed directly in the Sideview by dragging their throw lines, and the Frequency Response panel makes choosing line array angles stress-free. Link Groups define how line arrays are connected, and allow electronic filters to be applied to correct for distance and splay angle.
- Manipulating Sources
- Source Types
- Source Controllers
- Source Groups
- Source Properties List
- Source Arrangements
- Source Templates
- Presets
- Tuning Filters
- Frequency Response vs Microphones
- Array State and Warnings
- Importing and Exporting Sources
- Rigging Calculations
- Vertical Array Rigging Calculations in System Optimiser
- Note: Your array is valid!
- Note: Use locking pin for element at position X
- Note: When configuring large systems it is recommended to verify with CODA AUDIO’s rigging calculator available at: https://codaaudio.com/rigging
- Note: Safety factor cannot be calculated for this cabinet configuration! Please refer to https://codaaudio.com/rigging for more information.
- Error: Safety factor is less than 10 for top frame
- Error: Safety factor is less than 10 for element at position X
- Error: Negative force on first pickpoint!
- Error: Negative force on second pickpoint!
- Error: Total weight exceeds WLL!
- Error: First Pickpoint load exceeds maximum load, resulting in safety factor below 10!
- Error: Second Pickpoint load exceeds maximum load, resulting in safety factor below 10!
- Error: EXBAR pins have a safety factor below 10, please use a different pickpoint!
- Error: Internal Error: Could not perform rigging calculations! Error:
- Integration with the Template Engine and the Source List
- Exporting a Rigging Report as PDF
- Vertical Array Rigging Calculations in System Optimiser
- Exporting System Geometry
- SPL Rendering